Occasionally, you may need to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few actions.
- First ensuring your red dot sight is turned on.
- Find the small reset button on the side of the device.
- Employ a small object to activate the reset lever for approximately three seconds.
- Let go the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
- Your red dot sight should now be returned to its factory settings.
Return to Your Holosun EPS Carry Red Dot to Defaults
In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, locate the tiny button on the side of your optic. Then, keep pressed it for around twelve seconds until you see the indicator light change. Your Holosun EPS Carry is now reset to its factory settings, ready for accurate shooting.
Bring Your Holosun EPS Carry Back to : Functionality
Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unintended activation during the process.
To perform a factory reset on your Holosun EPS Carry, follow these simple steps:
- Press and hold the power button for approximately 10 seconds.
- The display will flash, indicating that the reset is being performed.
- Release the power button once the reset is complete.
Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter any further troubles, don't hesitate to seek help from Holosun's support.
Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide
Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.
- Beginning with, Activate your Holosun EPS Carry by pressing the power button.
- Subsequently, press and hold both the mode button and the up/down adjustment button simultaneously.
- While continue holding these buttons, tap the power button once.
- You will show a confirmation prompt indicating that the reset process is initiated.
- Permit the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.
After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.
Clear All Settings on Your Holosun EPS Carry
To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an more info option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.
Reset your Holosun EPS Carry via a Factory Original Settings
If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will return your sight to its original settings, clearing any altered configurations you've made. To accomplish this reset, observe these simple steps:
- To begin, identify the reset switch on your EPS Carry.
- Secondly, engage a fine object, like a toothpick, to push the reset button.
- As you maintain the reset switch engaged, activate your EPS Carry.
- It will flash a message indicating that the reset is successful.
When the reset is complete, your EPS Carry will be back to its factory settings.